Managing Fire Hazards on Site

Building environments, especially those in a transitional phase, introduce specific fire hazards due to shifting layouts, mobile equipment, and scattered workforces. A reliable alerting system is crucial for notifying workers without delay. The Howler line-up, including the radio-based GOLink system, HO units, and site alert models, provides a tailored safety solution to match various site demands.

A Look at HO Alarms

HO alarms are self-powered, battery-operated devices used where traditional systems are impractical. Ideal for moveable cabins or outbuildings, they require no wiring.

• Loud alarm: Around 102 dB at a metre’s distance.


• Visual signal option: Some models include integrated lights for visibility.


• IP-rated: Many are suited for outdoor use or partially exposed areas.

These alarms offer additional coverage where the main alert network may not reach.

The Site-Wide Alert Range

Suitable for mid-sized projects, the Site Alert system operates individually or in linked setups of up to 20 units using a simple two-core cable. When set off, all devices in the network respond simultaneously.

• Approx. 100 dB sound level at 1 metre


• Built-in visual LED for loud or noisy settings


• Ideal where cabling is straightforward

Going Wireless: Site Alert RF

Where cable routes aren't possible, Site Alert RF links up to 30 units over wireless. It has an open-area range of around 1 km and supports multiple channels for interference avoidance.

Combining wireless and cabled systems is frequently the best strategy for sites with varying structures.

Integrating the GOLink System

The GOLink system serves as a coordinating hub for large, multi-zone installations, using wireless signals to connect multiple devices.

GOLink Interface Connections

Through the Interface Unit, it’s possible to tie into turnstiles, autodiallers, CCTV, and other site safety components. Up to 127 points can connect across a site-wide network.

First Aid Callouts

howler site alert systems Certain models (e.g. H05 GOLink) include a first aid button alongside the fire alert. The first aid signal quietly sends a location-specific assistance request, allowing medical needs to be flagged without general evacuation.

How to Deploy Effectively

• Zone assessment: Identify where alarms need to be noticeable, dividing the site into manageable sectors.


• Choose connection types wisely: Use hard-wired alarms where feasible, supplementing with RF in distant or pop-up areas.


• Set a maintenance routine: Schedule weekly testing and monitor battery levels.


• Training & signage: Ensure instructions are posted and team members know how to respond to alerts.

FAQs

How many devices can be wired together?

Up to 20 Site Alert units can be connected using 2-core cable.

get more info

What’s the wireless range of Site Alert RF?

Approx. 1 km in open-air conditions, though physical obstructions can reduce range.

HO panel required?

No, HO models are standalone and do not require central control.

Is third-party integration supported?

Yes, external systems can be connected via the GOLink Interface Unit.

Purpose of switch protection?

It reduces false alarms by sounding a warning if tampered with before activation.

Can both cabled and RF alarms work together?

Yes, the GOLink system allows wired and wireless units to operate on the same network.

Does first aid signal cause evacuation?

No. It sends a targeted alert to designated receivers without activating evacuation systems—unless configured otherwise.

Final Notes

Whether your project involves one zone or several, Howler alarms—HO, GOLink, and Site Alert—deliver protection that adapt to varying conditions. For product information, planning tools or live demos, visit the Howler section on FireSense.